designed by my Websitebuilder.com

MEGAPAN^® CEILING CONSTRUCTION

Distances of structures and distances and under consumption of fasteners

Center to center distance of the substructure

Distances and use of fasteners in ceiling structures

When ceilings are the structural elements of the substructure to be conducted according to the table overleaf.

With the interconnection of the support structure must be using the appropriate fasteners for this:

•      with wood screws or nails or spread applied crosswise staples
•      for metal profiles: special connectors.

All fasteners should be deep enough into the plate to be recessed Megapan^®.

The Megapan^® plates must be made free of tension. On the mounting shafts, the screw or staple from the center of the plate to the edges to be confirmed or a panel edge continuously to the other edge.

In no case should first be screwed into all corners and then the center of the plate. Remember that the plates firmly pressed on the substructure.

When connecting Megapan^® wall, ceiling and roof constructions which have one or more layers Megapan^® sheets to dissimilar materials such as plaster, concrete, masonry, steel or wood, should always be a separation made ​​between the various building materials.

Since ceilings, roofs and walls Megapan^® plating under the influence of the climate movement subject (expansion and contraction) requires both ceiling and wall constructions diligence mentation joints to provide for ceiling, roof and wall lengths above 10 m.